Browse Skills — Page 181

matlab-design-pcb-coupler

matlab/matlab-agentic-toolkit

Wilkinson, branchline, ratrace, directional couplers, corporate dividers, Rotman lenses for power splitting and beam-forming. TRIGGER: user asks to design, create, or analyze any coupler, splitter, power divider, combiner, or Rotman lens. Invoke BEFORE writing code — class names and design() availability vary per coupler type. SKIP: EM simulation/S-parameter extraction of an existing component (use matlab-analyze-em), building custom non-catalog geometry (use matlab-assemble-pcb-layout), material/stackup setup only (use matlab-manage-pcb-material), cascading multiple components (use matlab-integrate-pcb-circuit).

matlab-design-pcb-filter

matlab/matlab-agentic-toolkit

Bandpass, lowpass, bandstop filter design — hairpin, coupled-line, combline, stub, SIW for frequency selection and harmonic rejection. TRIGGER: user asks to design, create, or analyze any RF filter (bandpass, lowpass, highpass, bandstop, hairpin, coupled-line, combline, stub, SIW). Invoke BEFORE writing code — filter class names differ from what you would guess. SKIP: EM simulation/S-parameter extraction of an existing filter (use matlab-analyze-em), general PCB layout assembly (use matlab-assemble-pcb-layout), material/stackup setup only (use matlab-manage-pcb-material), optimization sweeps (use matlab-optimize-pcb-design).

matlab-design-pcb-passive

matlab/matlab-agentic-toolkit

Spiral inductors, interdigital capacitors, baluns, resonators, phase shifters for impedance matching, DC blocking, and bias tees. TRIGGER: user asks to design or create a spiral inductor, interdigital capacitor, balun, resonator, phase shifter, or other passive RF component. Invoke BEFORE writing code — class names and property patterns are non-obvious. SKIP: filter design (use matlab-design-pcb-filter), coupler/splitter design (use matlab-design-pcb-coupler), transmission line design (use matlab-design-pcb-txline), EM analysis (use matlab-analyze-em), material setup only (use matlab-manage-pcb-material).

matlab-design-pcb-txline

matlab/matlab-agentic-toolkit

Microstrip, stripline, CPW, differential pairs, and crosstalk analysis for impedance-controlled PCB interconnects. TRIGGER: user asks to design or analyze a transmission line (microstrip, stripline, CPW, coplanar, differential pair), extract RLGC or per-unit-length parameters, compute trace impedance, analyze a PCB trace cross-section, or perform crosstalk/coupling analysis. Invoke BEFORE writing code — preferred over RF Toolbox analytical functions (txlineMicrostrip, txlineStripline, txlineCPW). SKIP: EM simulation/S-parameter extraction of an existing component (use matlab-analyze-em), material/stackup definition only (use matlab-manage-pcb-material), building custom non-catalog geometry (use matlab-assemble-pcb-layout), optimization sweeps (use matlab-optimize-pcb-design).

matlab-design-radar-waveform

matlab/matlab-agentic-toolkit

>

matlab-design-reflectarray

matlab/matlab-agentic-toolkit

Design reflectarray antennas and reconfigurable intelligent surfaces (RIS) using MATLAB Antenna Toolbox. Builds unit cells with pcbStack, characterizes reflection phase (S-curve) via planeWaveExcitation + infiniteArray + EHfields, synthesizes aperture phase distributions, builds physical geometry with conformalArray, and verifies patterns via pattern multiplication. Use when the user wants to design a reflectarray, RIS, intelligent reflecting surface, or periodic surface with phase control.

matlab-design-reflector-antenna

matlab/matlab-agentic-toolkit

Design and analyze curved reflector antennas using MATLAB Antenna Toolbox. Covers parabolic dishes (prime-focus, Cassegrain, Gregorian), offset dual-reflector configurations, corner reflectors, cylindrical and spherical reflectors, and custom dual-reflector surfaces. Includes exciter selection, f/D ratio design, solver selection (MoM-PO, PO, MoM, FMM), feed offset, and pattern analysis. Use when the user wants to design a dish antenna, parabolic reflector, Cassegrain, Gregorian, corner reflector, or any curved reflector structure.

matlab-diagnose-parfor

matlab/matlab-agentic-toolkit

>

matlab-discover-clusters

matlab/matlab-agentic-toolkit

>

matlab-discover-hardware

matlab/matlab-agentic-toolkit

Discovers connected MATLAB-supported hardware devices, searches by capability, and checks required support packages and add-ons. Use when the user asks what hardware is connected, finds a device that supports a capability (e.g., CAN, analog input), or checks if required support packages or add-ons are installed.

matlab-display-image

matlab/matlab-agentic-toolkit

Display images and annotations for image processing, computer vision, and visual inspection. Use when displaying images with imageshow, creating image viewers with viewer2d, adding Regions of Interest (ROI) or annotations, overlaying masks or segmentations, streaming video frames, or building apps with image display.

matlab-display-volume

matlab/matlab-agentic-toolkit

Display 3-D image volumes, medical image volumes, surface meshes, and annotations for 3-D image processing. Use when displaying 3-D images or isosurfaces with volshow, creating volume viewers with viewer3d, adding Regions of Interest (ROI) or annotations, overlaying masks or segmentations, streaming volumetric data, or building apps with volume display.

matlab-document-toolbox

matlab/matlab-agentic-toolkit

|

matlab-driving-data-importer

matlab/matlab-agentic-toolkit

Import recorded driving sensor data (GPS, camera, lidar, actor tracks, lanes) into scenariobuilder.* objects (GPSData, CameraData, LidarData, ActorTrackData, Trajectory, laneData) and run preprocessing — synchronize, offset correction, crop, normalizeTimestamps, convertTimestamps. Also: compute actor tracks from lidar when no annotations exist, attach camera/lidar mounting + intrinsics, export to MAT/workspace/timetable/script. Use for raw driving dataset files (KITTI, nuScenes, Waymo, Pandaset, ROS/ROS2 bags, .mat, .csv, .mp4) or driving/vehicle/sensor logs that need wrapping. drivingLogAnalyzer (DLA) is OPT-IN ONLY — invoke only on explicit user request ('DLA', 'open in DLA', 'inspect/explore/analyze the recording') or reported sensor problem (sync drift, timestamp mismatch, overlay misalignment). NEVER auto-launch DLA after wrapping (Rule 0). For 'build scenario / export to RoadRunner / drivingScenario / OpenSCENARIO / Unreal / simulate', hand off to matlab-scenario-builder.

matlab-dsphdl-ddc-design

matlab/matlab-agentic-toolkit

Use when designing a Digital Down Converter (DDC) using dsphdl System objects. Triggers on requests involving DDC design, frequency down-conversion for FPGA/ASIC, NCO + mixer + decimation filter chains, fractional/non-integer sample rate conversion, or HDL-optimized receiver front-end signal processing.

matlab-enhance-camera-image

matlab/matlab-agentic-toolkit

>

matlab-estimate-sar

matlab/matlab-agentic-toolkit

Estimate Specific Absorption Rate (SAR) of electromagnetic fields inside dielectric tissue phantoms using MATLAB Antenna Toolbox. Supports three approaches -- birdcage coil with volumetric Phantom (full tissue properties), conformalArray with shape.Custom3D (antenna outside tissue), and direct EHfields for implantable antennas (antenna inside tissue). Computes internal E-fields, calculates point and mass-averaged SAR, and validates via power balance. Use when the user wants to compute SAR, tissue absorption, or RF exposure from antennas near or inside biological tissue.

matlab-exclude-files

matlab/matlab-agentic-toolkit

Analyze a toolbox folder and generate a toolbox.ignore file — detects files that should not ship to end users based on what actually exists in the folder. Only suggests patterns for files found. Advisory: presents suggestions with reasons before writing.

matlab-export-session-script

matlab/matlab-agentic-toolkit

Export conversation MATLAB code to a clean, runnable .m script. Use when asked to save or export session work. TRIGGER: user asks to save, export, or generate a script from the current session's MATLAB code. Also when asked for a reproducible script or clean version of what was run.

matlab-extract-signal-features

matlab/matlab-agentic-toolkit

>

matlab-find-pi-assets

matlab/matlab-agentic-toolkit

>

matlab-fit-simbiology-model

matlab/matlab-agentic-toolkit

Fit SimBiology model parameters to data — fitproblem, population NLME, virtual patients, and NCA. Use when asked to fit, estimate, calibrate, or compute PK metrics.

matlab-fuse-inertial-sensors

matlab/matlab-agentic-toolkit

>

matlab-generate-5g-waveform

matlab/matlab-agentic-toolkit

>

matlab-generate-ble-waveform

matlab/matlab-agentic-toolkit

>

matlab-generate-gnss-waveform

matlab/matlab-agentic-toolkit

>

matlab-generate-report

matlab/matlab-agentic-toolkit

>

matlab-generate-wlan-waveform

matlab/matlab-agentic-toolkit

>

matlab-import-external-ai-model

matlab/matlab-agentic-toolkit

>

matlab-import-tracking-data

matlab/matlab-agentic-toolkit

Import raw ground truth data (CSV, XLSX, TXT, or MATLAB tables) into formats used by Sensor Fusion and Tracking Toolbox: trackingScenarioRecording, tuning data timetable, truthlog struct array, or a clean converted table. Use when the user has recorded position/trajectory data and wants to: replay a tracking scenario from real data, tune tracking filters (EKF, UKF, IMM) with recorded truth, or assess tracker accuracy (GOSPA, OSPA, assignment metrics) against ground truth. Also use when the user mentions trackingDataImporter, importing flight logs, GPS logs, ADS-B data, AIS ship tracks, radar recordings, driving logs, or converting raw position data for use with trackers.

matlab-import-vehicle-data

matlab/matlab-agentic-toolkit

Use when importing vehicle data from log files (MDF/MF4/DAT, BLF, ASC/TXT), decoding CAN/CAN FD/LIN messages to signals via DBC, ARXML, or LDF databases, or calling blfread, blfinfo, mdfRead, canSignalImport, canMessageImport, canMessageTimetable, canFDMessageTimetable, canSignalTimetable, or linMessageTimetable.

matlab-install-products

matlab/matlab-agentic-toolkit

Deterministic workflow to download MATLAB Package Manager (mpm) and install MathWorks products from the OS command line with consistent, repeatable behavior. Use when installing MATLAB, Simulink, toolboxes, or support packages via command line, or setting up scripted installations for CI/CD, containers, or fleet provisioning.

matlab-instrument-opentelemetry-tracing

matlab/matlab-agentic-toolkit

>

matlab-integrate-pcb-circuit

matlab/matlab-agentic-toolkit

Cascade PCB components, add lumped elements, export Touchstone, and bridge to eye diagram or antenna array workflows. TRIGGER: user asks to cascade or connect multiple RF PCB components, add lumped R/L/C, export S-parameters to Touchstone, or combine PCB elements into a circuit. Invoke BEFORE writing pcbcascade or circuit code — cascade rules and port matching are non-obvious. SKIP: designing individual components (use the specific matlab-design-pcb-* skill), EM analysis of a single component (use matlab-analyze-em), material/stackup setup only (use matlab-manage-pcb-material), optimization (use matlab-optimize-pcb-design).

matlab-integrate-pytorch-vision

matlab/matlab-agentic-toolkit

>-

matlab-list-products

matlab/matlab-agentic-toolkit

Show all installed MATLAB products and support packages for a given MATLAB installation folder. Use when listing, checking, or verifying what products or support packages are in a MATLAB installation.

matlab-manage-pcb-material

matlab/matlab-agentic-toolkit

Dielectric substrates, metal conductors, multi-layer stackups, and loss models (FR4, Rogers, Teflon) for RF PCB simulation. TRIGGER: user asks to set up a substrate, define dielectric properties, create a stackup, select a PCB material (FR4, Rogers, Teflon, etc.), or configure metal conductors. Invoke BEFORE writing dielectric() or metal() code — the API for named vs custom materials differs significantly. SKIP: PCB layout assembly (use matlab-assemble-pcb-layout), transmission line design (use matlab-design-pcb-txline), EM analysis (use matlab-analyze-em), importing a PCB file (use matlab-read-pcb-layout).

matlab-map-database-objects

matlab/matlab-agentic-toolkit

Generates MATLAB Object Relational Mapping (ORM) code using Database Toolbox. Use when mapping MATLAB classes to database tables, reading/writing objects with ormread/ormwrite/ormupdate, defining Mappable classes, converting classes to SQL with orm2sql, or using object-oriented database workflows.

matlab-model-ams-systems

matlab/matlab-agentic-toolkit

Model a Phase-Locked Loop (PLL) IC from its datasheet or system specs using Mixed-Signal Blockset. Without this skill, agents universally select the wrong solver and produce non-functional PLL models — 100% of unguided attempts fail. Covers Integer-N, Fractional-N, Dual Modulus architectures, loop filter design, lock time optimization, VCO phase noise configuration, and msbPllArchitectures/msbPllFoundation block assembly. Use when: PLL modeling, frequency synthesizer design, phase noise simulation, lock time analysis, charge pump design, loop filter tuning, datasheet-to-model, Mixed-Signal Blockset PLL, msbPllArchitectures.

matlab-model-optics

matlab/matlab-agentic-toolkit

>

matlab-model-rf

matlab/matlab-agentic-toolkit

>

matlab-model-robot-kinematics

matlab/matlab-agentic-toolkit

>

matlab-model-serdes-systems

matlab/matlab-agentic-toolkit

>

matlab-model-via

matlab/matlab-agentic-toolkit

Via modeling: pads, antipads, ground return vias, GRV placement, and signal integrity for high-speed layer transitions. TRIGGER: user asks to model a via, design a via transition, place ground return vias, analyze via performance, or check signal integrity through layer transitions. Invoke BEFORE writing code — only viaSingleEnded exists (no viaDifferential), and the location format is non-obvious. SKIP: general signal integrity without vias (use matlab-analyze-em), transmission line design (use matlab-design-pcb-txline), PDN analysis (use matlab-analyze-pcb-pdn), material/stackup setup only (use matlab-manage-pcb-material).

matlab-modernize-code

matlab/matlab-agentic-toolkit

>

matlab-modernize-daq

matlab/matlab-agentic-toolkit

>

matlab-ncap-testing

matlab/matlab-agentic-toolkit

>

matlab-ocr

matlab/matlab-agentic-toolkit

>

matlab-optimize-antenna

matlab/matlab-agentic-toolkit

Optimize antennas and arrays using MATLAB Antenna Toolbox SADEA and TR-SADEA algorithms. Supports catalog antenna/array optimization with built-in objectives (gain, bandwidth, SLL, F/B ratio) and constraints, plus custom evaluation functions for pcbStack and customAntenna. Use when the user wants to optimize, tune, improve, or search for the best antenna or array design parameters.

matlab-optimize-memory

matlab/matlab-agentic-toolkit

Guides the 7-step MATLAB memory optimization workflow: baseline, profile, identify, optimize, measure, verify, report. Use when asked to reduce MATLAB memory usage, find memory bottlenecks, fix out-of-memory errors, or optimize memory-intensive code.

matlab-optimize-pcb-design

matlab/matlab-agentic-toolkit

Optimize RF PCB dimensions for bandwidth, return loss, or area via patternsearch and surrogateopt with constraints. TRIGGER: user asks to optimize an RF PCB component for performance (bandwidth, return loss, insertion loss, area) or apply constraints to a design. Invoke BEFORE writing optimization code — RF PCB Toolbox has a built-in optimize() function that differs from generic fmincon/ga approaches. SKIP: designing a component from scratch without an optimization objective (use the specific matlab-design-pcb-* skill), EM analysis without optimization (use matlab-analyze-em), material/stackup setup only (use matlab-manage-pcb-material).

matlab-optimize-performance

matlab/matlab-agentic-toolkit

Read BEFORE optimizing any MATLAB code for speed. Without this workflow, agents commonly optimize the wrong target, fabricate speedup claims without measurement, or introduce regressions. Guides the 7-step workflow: baseline, profile, identify, optimize, measure, verify, report.

matlab-performance-optimizer

matlab/agent-skills-playground

Optimize MATLAB code for better performance through vectorization, memory management, and profiling. Use when user requests optimization, mentions slow code, performance issues, speed improvements, or asks to make code faster or more efficient.

matlab-plan-robot-motion

matlab/matlab-agentic-toolkit

>

matlab-play-record-audio

matlab/matlab-agentic-toolkit

Reference for MATLAB audiostreamer (Audio Toolbox R2025a+). Without this skill, agents consistently default to legacy audioDeviceWriter/audioDeviceReader or base MATLAB sound(), producing less capable code. Use when writing code for audio playback, recording, full-duplex device I/O, real-time audio measurements, or audio I/O processing with callbacks. Also use when debugging audiostreamer errors, dropouts, or latency issues, or migrating from audioDeviceReader, audioDeviceWriter, audioPlayerRecorder, or audioplayer/audiorecorder.

matlab-point-cloud-file-io

matlab/matlab-agentic-toolkit

Read and write 3-D point cloud data using Lidar Toolbox file I/O. Covers PLY, PCD, LAS/LAZ, PCAP (Velodyne/Ouster/Hesai), E57, and IDC (Ibeo) formats. Use when loading point clouds from disk, saving to disk, choosing the correct reader or writer for a file format, extracting or preserving lidar point attributes, reading Ibeo IDC sensor recordings, or converting between formats.

matlab-point-cloud-registration

matlab/matlab-agentic-toolkit

Register 3-D point clouds using ICP, NDT, LOAM, FGR, phase correlation, and CPD algorithms. Use when registering or aligning 3-D point clouds, choosing a registration algorithm, tuning registration parameters, preprocessing point clouds for registration or combining point clouds after registration.

matlab-prepare-signal-data

matlab/matlab-agentic-toolkit

|

matlab-process-large-images

matlab/matlab-agentic-toolkit

Patterns for using blockedImage to process large images, harness parallel compute for image processing, and write custom adapters. Use when writing code that creates, processes, or visualizes blockedImage objects, when implementing images.blocked.Adapter subclasses, or when a user needs help with large image data. Always use this skill when working with TIFF,GeoTIFF, .svs, .ndpi, .czi or other WSI, satellite imagery or microscopy volume image formats.

matlab-project

matlab/agent-skills-playground

Use this skill for any work involving a MATLAB Project (.prj file) — creating a new project, tracking files, managing the project path, configuring Simulink cache and code-generation folders, running project health checks, or writing build scripts that keep the project in sync with the file system. Trigger phrases include "set up a MATLAB project", "create a .prj", "track this file in the project", "project health check", "build script conventions". This skill is the generic foundation; domain-specific skills (e.g. `mbse-workflow`) build on it.

matlab-publish-toolbox

matlab/matlab-agentic-toolkit

Version-stamp, re-package, and distribute the .mltbx toolbox. Sets version in ToolboxOptions, re-runs packageToolbox, and guides distribution. Requires explicit user confirmation.

matlab-read-database

matlab/matlab-agentic-toolkit

Reads data from relational databases using MATLAB Database Toolbox pushdown capabilities. Use when importing data from JDBC/ODBC databases, filtering rows, selecting columns, excluding duplicates, joining database tables, using sqlread, fetch, sqlinnerjoin, sqlouterjoin, databaseImportOptions, or rowfilter.

matlab-read-doc

matlab/matlab-agentic-toolkit

Guides the agent to reference official MathWorks Documentation and Help. Determine correct function syntax and workflows from user guides when deeper context is needed. Minimize iterations and repetitive trial and error. Use this skill to: Identify correct syntax and configuration details. Retrieve relevant, version-specific (or release-specific) information from official documentation. Consult user guides when conceptual or workflow context is needed. Apply best practices.

matlab-read-medical-data

matlab/matlab-agentic-toolkit

>

matlab-read-pcb-layout

matlab/matlab-agentic-toolkit

Import Gerber, ODB++, Allegro .brd, .mcm files for PCB boards and IC packages. Inspect nets, layers, shapes, and stackups. TRIGGER: user asks to import, read, or open a PCB layout file. Gerber files use gerberRead or PCBReader; ODB++, Allegro .brd, .mcm, and native formats use pcbFileRead. Also when inspecting nets, layers, components, or stackups from an imported board. Invoke BEFORE writing import code — the query API (cadnet, cadnetList, componentList) is specialized. SKIP: EM analysis or S-parameter extraction (use matlab-analyze-em), PDN/IR-drop analysis (use matlab-analyze-pcb-pdn), building custom geometry (use matlab-assemble-pcb-layout), material/stackup definition only (use matlab-manage-pcb-material).

matlab-review-code

matlab/matlab-agentic-toolkit

Review MATLAB code for quality, performance, maintainability, and adherence to MathWorks coding standards. Uses check_matlab_code and matlab_coding_guidelines. Use when reviewing code, checking style, finding code smells, assessing quality, or preparing code for handoff or publication.

matlab-review-fi-code

matlab/matlab-agentic-toolkit

Reviews MATLAB fixed-point (fi) code for performance, code generation efficiency, and correctness. Identifies antipatterns and suggests idiomatic improvements. Use when reviewing fi, fimath, numerictype, or quantizenumeric code.

matlab-scenario-builder

matlab/matlab-agentic-toolkit

Generate driving scenes, scenarios, road surfaces, and 3D content from scenariobuilder.* sensor data (GPS, camera, lidar, actor tracks) using Scenario Builder for Automated Driving Toolbox. BUILD, EXPORT, or AUGMENT a virtual scenario/scene/map: ego or actor trajectories, trajectory smoothing, OpenCRG road-surface extraction, 3D asset generation, static-object placement, point-cloud georeferencing + elevation, lane-based ego localization, sensor-fusion tracking, scenario-event extraction (cut-ins, hard brakes, near-misses, ADAS disengagements), or export to RoadRunner, drivingScenario, OpenDRIVE, OpenCRG, OpenSCENARIO, or Unreal Engine. Also: log-to-scenario, scenario harvesting, accident/near-miss reconstruction, SOTIF (ISO 21448) and ISO 26262 scenario coverage, USGS-aerial-lidar augmentation, traffic-sign placement, vision-based vehicle classification for actor assets. NOT for raw-data import or multi-sensor sync/crop/offset/timestamp normalization — route those to matlab-driving-data-importer.

matlab-scientific-computing

jaechang-hits/SciAgent-Skills

MATLAB/GNU Octave numerical computing: matrices, linear algebra, ODEs, signal processing, optimization, statistics, scientific visualization. MATLAB-syntax examples run on both. For Python use numpy/scipy; for statistical modeling use statsmodels.

matlab-set-up-usrp-radio

matlab/matlab-agentic-toolkit

>

matlab-setup-gpu

matlab/matlab-agentic-toolkit

>

matlab-setup-worker-state

matlab/matlab-agentic-toolkit

>

matlab-sharing

matlab/matlab-agentic-toolkit

>

matlab-simulate-bluetooth-network

matlab/matlab-agentic-toolkit

>

matlab-simulate-radar-detections

matlab/matlab-agentic-toolkit

>

matlab-simulate-simbiology-model

matlab/matlab-agentic-toolkit

Simulate SimBiology models — ODE, stochastic (SSA), scenarios, and sensitivity analysis. Use when asked to run, simulate, predict, explore what-if, or identify influential parameters.

matlab-simulate-wireless-network

matlab/matlab-agentic-toolkit

>

matlab-solve-optimization

matlab/matlab-agentic-toolkit

>-

matlab-solve-pde

matlab/matlab-agentic-toolkit

>

matlab-symbolic-math

matlab/agent-skills-playground

Generate correct MATLAB code using the Symbolic Math Toolbox. Use when the user asks for symbolic computations, analytical solutions, symbolic differentiation/integration, equation solving, or converting symbolic results to numeric MATLAB functions. Also use when converting differential equations to transfer functions or state-space form.

matlab-testing

matlab/matlab-agentic-toolkit

Generate and run MATLAB unit tests using matlab.unittest and matlab.uitest. Parameterized tests, fixtures, mocking, coverage analysis, CI/CD with buildtool, app testing with gestures. Use when creating tests, writing test classes, running test suites, checking coverage, testing apps, or validating MATLAB code.

matlab-theming

matlab/matlab-agentic-toolkit

>

matlab-train-network

matlab/matlab-agentic-toolkit

>

matlab-uihtml-app-builder

matlab/agent-skills-playground

Build interactive web applications using HTML/JavaScript interfaces with MATLAB computational backends via the uihtml component. Use when creating HTML-based MATLAB apps, JavaScript MATLAB interfaces, web UIs with MATLAB, interactive MATLAB GUIs, or when user mentions uihtml, HTML, JavaScript, web apps, or web interfaces.

matlab-uihtml-design

matlab/agent-skills-playground

Generate beautiful, distinctive HTML/CSS/JS control panels for MATLAB uihtml components. 8 built-in styles (Clean, Material, Cosmic Dark, Neumorphic, Dashboard Light, Midnight Gradient, Minimal Mono, Warm Dark) plus custom aesthetics. Produces production-grade UI with sliders, buttons, toggles, and panels. Use when building visually polished MATLAB app UIs with uihtml.

matlab-upgrade-mex-ic

matlab/matlab-agentic-toolkit

>

matlab-use-cameras

matlab/matlab-agentic-toolkit

>

matlab-use-duckdb

matlab/matlab-agentic-toolkit

Use DuckDB from MATLAB via Database Toolbox (R2026a+) as a non-math operations engine on large tabular files (CSV/Parquet/JSON) and as a zero-config embedded database. Use when connecting to DuckDB, querying CSV, Parquet, and JSON files directly with SQL, reducing or profiling large data before MATLAB analysis, creating portable development databases, or installing DuckDB extensions. Triggers on: DuckDB, duckdb(), large CSV/Parquet/JSON, file too large for readtable, filter/aggregate at source, deduplicate, reduce before analysis, profile large file, persistent file import, analytical engine, SQL on CSV, SQL on Parquet, SQL on JSON, query CSV with SQL, query Parquet with SQL, run SQL on files, SQL queries on files, query files directly, SQL without database, in-process SQL.

matlab-use-machine-learning-apps

matlab/matlab-agentic-toolkit

Use when the user wants to train, compare, or export machine learning models using Classification Learner or Regression Learner — including opening the app, loading data, training models, evaluating metrics, comparing results, visualizing plots, testing on held-out data, exploring model interpretability, and exporting trained models. Programmatic access to Classification Learner and Regression Learner apps via AppController.

matlab-use-thread-pool

matlab/matlab-agentic-toolkit

>

matlab-validate-function-arguments

matlab/matlab-agentic-toolkit

>

matlab-vehicle-network-communication

matlab/matlab-agentic-toolkit

Use when setting up vehicle network communication in MATLAB using Vehicle Network Toolbox. Covers CAN/CAN FD (fully implemented), with architecture for J1939, XCP, and future protocols. Handles hardware discovery, channel creation, bus configuration, message exchange, signal encoding/decoding, and analysis across all supported vendors (Vector, Kvaser, PEAK-System, NI, SocketCAN, MathWorks Virtual).

matlab-write-audio-plugin

matlab/matlab-agentic-toolkit

>

matlab-write-database

matlab/matlab-agentic-toolkit

Writes data from MATLAB to relational databases and performs database operations. Use when writing data with sqlwrite, updating rows with sqlupdate, executing SQL with execute, running stored procedures, managing transactions with commit/rollback, creating tables, or using SQL prepared statements.

matlab-write-help

matlab/matlab-agentic-toolkit

Generate or improve MATLAB help text (documentation comments) for a function, class, or script file following MathWorks standards (H1 line, syntax paragraphs, See Also, 75-char lines). Read BEFORE writing MATLAB help — default patterns (Inputs:/Outputs: lists, block comments, uppercase See Also) produce non-conforming output. Use when writing, rewriting, fixing, or reviewing MATLAB help comments or function documentation.

matlab-write-pcb-layout

matlab/matlab-agentic-toolkit

Export pcbComponent designs to Gerber files with RF connectors and fab service formatting for PCB manufacturing. TRIGGER: user asks to export a PCB design to Gerber, generate manufacturing files, or write out a pcbComponent for fabrication. Invoke BEFORE writing export code — gerberWrite signature (pcbComponent, connectors, filename) is non-obvious. SKIP: importing/reading PCB files (use matlab-read-pcb-layout), building PCB geometry (use matlab-assemble-pcb-layout), EM analysis (use matlab-analyze-em), material/stackup setup (use matlab-manage-pcb-material).

matlab-write-performance-tests

matlab/matlab-agentic-toolkit

Writes MATLAB performance tests using the matlab.perftest.TestCase framework. Use when asked to write, create, or add performance tests for MATLAB code, benchmark functions, measure execution time with statistical rigor, or use runperf.

matplotlib

K-Dense-AI/scientific-agent-skills

Low-level plotting library for full customization. Use when you need fine-grained control over every plot element, creating novel plot types, or integrating with specific scientific workflows. Export to PNG/PDF/SVG for publication. For quick statistical plots use seaborn; for interactive plots use plotly; for publication-ready multi-panel figures with journal styling, use scientific-visualization.

matplotlib-scientific-plotting

jaechang-hits/SciAgent-Skills

Low-level Python plotting for scientific figures: publication-quality line, scatter, bar, heatmap, contour, 3D; multi-panel layouts; fine control of every element. PNG/PDF/SVG export. Use seaborn for quick stats, plotly for interactive.

matplotlib-v2

diegosouzapw/awesome-omni-skills

Matplotlib workflow skill. Use this skill when the user needs Matplotlib is Python's foundational visualization library for creating static, animated, and interactive plots and the operator should preserve the upstream workflow, copied support files, and provenance before merging or handing off.